Cressida - tell me bout urs  

Page 6 of 64
Jump to page
MrDOHC
Post #176

did u buy shanes box

MrDOHC
Post #177

heres the thread on the cruise

https://www.boostcruising.com/forums/index....howtopic=251579

000.PLS (1jcressida)
Post #178

QUOTE(MrDOHC @ Nov 18 2007, 12:28 PM) [snapback]1281639515[/snapback]

did u buy shanes box

nah i bought a new 1 3500 stalle n every thing i need to run the good times

skitzcressie
Post #179

hey guys wots doin just wondering if any1 got a good head for a 7mge i just put a 2j instead of a 1j in my cressida dam wiring harness suk so i put the 7m engine in a ke75 rolla just for a bit of fun and a burn out car and ive done the head and need a new 1 if any 1 got 1 give me a call on 0421038554 o and i got a spoiler on my cressie now and it looks sweet

GREATWHITESHARK#1
Post #180

Hey guys thinking of buying a cressy and just want to know how big wheels i can fit on them? i think the best wheels would be a 215/35/18 or 19's.

MrDOHC
Post #181

they run 205 as standard, 235's on 17/18/19 are common, 255 MT ET street radials are the limit

195's are fun with a 1J

000.PLS (1jcressida)
Post #182

i drive on 245/19/35 n mr dohc is helpin me sort out my drag spec wheels lol

GREATWHITESHARK#1
Post #183

So do you have to roll the guards to fit 18 or 19's? :thumbsup:

000.PLS (1jcressida)
Post #184

on my old cressy i had 235/18/35 n on both my cars i had the guards rolled so yeh u do mate

*57UFD*
Post #185

hey peps jus keepin u guys updated
gear box is in, microtech is almost done, microtech digital dash, bought a b&m compisite x carbon fibre ratchet shifter, carbon fibre gauges (oil pressure trans temp), carbon fibre gauge pods, then just gotta get a tune

cheers 000.PLS (1jcressida)

OIM.666
Post #186

QUOTE(*57UFD* @ Nov 30 2007, 09:03 PM) [snapback]1281677772[/snapback]

hey peps jus keepin u guys updated
gear box is in, microtech is almost done, microtech digital dash, bought a b&m compisite x carbon fibre ratchet shifter, carbon fibre gauges (oil pressure trans temp), carbon fibre gauge pods, then just gotta get a tune

cheers 000.PLS (1jcressida)


Should be good when it's done.

MD0086
Post #187

QUOTE(*57UFD* @ Nov 30 2007, 09:03 PM) [snapback]1281677772[/snapback]

hey peps jus keepin u guys updated
gear box is in, microtech is almost done, microtech digital dash, bought a b&m compisite x carbon fibre ratchet shifter, carbon fibre gauges (oil pressure trans temp), carbon fibre gauge pods, then just gotta get a tune

cheers 000.PLS (1jcressida)


your welcome :lol:

after checking the cressy out yesterday...should be good fun when it hits the road all tuned and ready to roll

skitzcressie
Post #188

go the almity cressida lol jap drift champ just won series in a 1j aussie made cressida


i wanna 1.5j or im gunna throw a tantie lmgdfao

000.PLS (1jcressida)
Post #189

QUOTE(MD0086 @ Nov 30 2007, 10:01 PM) [snapback]1281677967[/snapback]

your welcome :lol:

after checking the cressy out yesterday...should be good fun when it hits the road all tuned and ready to roll

yes a big thanks to u, u get front seat in my car when she is ready

1JZ.747
Post #190

QUOTE(000.PLS (1jcressida) @ Nov 25 2007, 11:24 PM) [snapback]1281661347[/snapback]

i drive on 245/19/35 n mr dohc is helpin me sort out my drag spec wheels lol


I selling my jzz30 rims with turanza's on the front and mt 255/50/16 rears.

email me at [email protected] if you are interested.

L.drifter
Post #191

gye guys kinda new at this stuff but i got a cressida if anyone wants to buy it.. i had a crash in it but hit nothing vital.. only front light and bumper are missing.. engine and stuff is all good .. im sick of it in my yard.. im up for any offers..

skitzcressie
Post #192

hey l.drifter how gud is the head on it and how much for it

OIM.666
Post #193

We just got a mint MX83 into work today with a blown up 7MGE. Took me about 2 seconds to decide to put my spare 1JZ in it.

Jusdrifn 86
Post #194

^ then sell it to me thanks craig :lol:

51NGL
Post #195

NOOB cressida fella ovber here.....

couple cressy questions:

1. What is the most common model for a 1J conversion???

2. Are these a direct bolt in replacment or customisation/fabrication nessisary???

3. What engine is best suited for the conversion??? i have seen Chaser and soarer engines? supra etc??? 7mgte maybe????




cheers for your help fellas! might persuade me into the cressy bandwagon :lol: ...awfully tempting!

*57UFD*
Post #196

QUOTE(OIM.666 @ Dec 5 2007, 01:43 PM) [snapback]1281691828[/snapback]

We just got a mint MX83 into work today with a blown up 7MGE. Took me about 2 seconds to decide to put my spare 1JZ in it.

craig that mean u own it or u wanna do that conversion??? come back to cressy town

000.PLS (1jcressida)

OIM.666
Post #197

QUOTE(*57UFD* @ Dec 5 2007, 04:19 PM) [snapback]1281692378[/snapback]

craig that mean u own it or u wanna do that conversion??? come back to cressy town

000.PLS (1jcressida)


Work got the Cressida(so I own it anyways really) in today and we have a Soarer with a 1JZ in it sitting out the back. I'll start on the conversion on the weekend. I just have to find a front sump now.

*57UFD*
Post #198

QUOTE(51NGL @ Dec 5 2007, 02:00 PM) [snapback]1281691880[/snapback]

NOOB cressida fella ovber here.....

couple cressy questions:

1. What is the most common model for a 1J conversion???

2. Are these a direct bolt in replacment or customisation/fabrication nessisary???

3. What engine is best suited for the conversion??? i have seen Chaser and soarer engines? supra etc??? 7mgte maybe????

cheers for your help fellas! might persuade me into the cressy bandwagon :lol: ...awfully tempting!

nice another 1 lol,
1.mx83 cressida

2.straight bolt in same engine mounts tail shaft little things change 95% bolt in, by a half cut

3. 1jzgte, 2jzgte, 7mgte, 1j most common cheaper same sort of power, 7m not really head problems but once fixed nice motor, if u can afford it 2jz

did u buy 1???

000.PLS (1jcressida)

MrDOHC
Post #199

QUOTE(51NGL @ Dec 5 2007, 02:00 PM) [snapback]1281691880[/snapback]

NOOB cressida fella ovber here.....

couple cressy questions:

1. What is the most common model for a 1J conversion???

2. Are these a direct bolt in replacment or customisation/fabrication nessisary???

3. What engine is best suited for the conversion??? i have seen Chaser and soarer engines? supra etc??? 7mgte maybe????

cheers for your help fellas! might persuade me into the cressy bandwagon :lol: ...awfully tempting!



most common is aus is the JZZ30 soarer, most common half cut is really mixed.

the best way is to get the JZX81 half cut, BASICALLY all u do is drop the entire engine/box/subframes out and it will bolt in, as will the standard cooler, and just some rewiring etc etc.

BUT, and it a big but, the wreckers charge accordingly, if u want the ease of direct fit, then u pay more, its upto u if u wanna go the easy way or the INITIALLY cheaper way.

i mean initially by the fact that u will need some mounts, a new sump, a cooler etc, can some out more exxy, all depends really.






hey daniel, do u have msn



HOPE EVERYONES READY FOR THE CRESSIDA CRUISE TO THE SPIT THIS SUNDAY

*57UFD*
Post #200

QUOTE(OIM.666 @ Dec 5 2007, 04:22 PM) [snapback]1281692396[/snapback]

Work got the Cressida(so I own it anyways really) in today and we have a Soarer with a 1JZ in it sitting out the back. I'll start on the conversion on the weekend. I just have to find a front sump now.

where u work??? wat u gonna build it for??? sounds like fun what model cressida???
welcome back tho lol

000.PLS (1jcressida)

AmperSand
Post #201

I hear there are some pretty cheap pre-made ones going around!
*cough*

Link

:lol:

*57UFD*
Post #202

QUOTE(MrDOHC @ Dec 5 2007, 04:29 PM) [snapback]1281692417[/snapback]

most common is aus is the JZZ30 soarer, most common half cut is really mixed.

the best way is to get the JZX81 half cut, BASICALLY all u do is drop the entire engine/box/subframes out and it will bolt in, as will the standard cooler, and just some rewiring etc etc.

BUT, and it a big but, the wreckers charge accordingly, if u want the ease of direct fit, then u pay more, its upto u if u wanna go the easy way or the INITIALLY cheaper way.

i mean initially by the fact that u will need some mounts, a new sump, a cooler etc, can some out more exxy, all depends really.
hey daniel, do u have msn
HOPE EVERYONES READY FOR THE CRESSIDA CRUISE TO THE SPIT THIS SUNDAY


ichiban motors in nsw charga 1950 for half cut with cooler my cressida mounts were the same

its cressida1j@hotmailcom

if there is a cressida driver round redcliffe shotgun front seat mine will b fully tuned on the 20thdec

000.PLS (1jcressida)

QUOTE(AmperSand @ Dec 5 2007, 04:55 PM) [snapback]1281692494[/snapback]

I hear there are some pretty cheap pre-made ones going around!
*cough*

Link

:lol:

nothin sus!!!!! sweet car

WHO KNOWS WHERE TO GET A STRUT BRACE???

MrDOHC
Post #203

i thnk hughsey has one

51NGL
Post #204

QUOTE(*57UFD* @ Dec 5 2007, 04:24 PM) [snapback]1281692403[/snapback]



did u buy 1???




nah i havnt bought one....................yet! :lol:

i saw a few round the last couple weeks. sounded so porn and looked tastfully sleeper.

i think i fell in love :lol:

Spidey
Post #205

I have a silver 92 model Grande that I am selling. Very good condition with 181 xxx kms and I am the 3rd owner. The first 2 were a father and son who are family frinds. PM for details. Cheers, Spidey.

000.PLS (1jcressida)
Post #206

QUOTE(51NGL @ Dec 6 2007, 09:58 AM) [snapback]1281694453[/snapback]

nah i havnt bought one....................yet! :lol:

i saw a few round the last couple weeks. sounded so porn and looked tastfully sleeper.

i think i fell in love :lol:


i owned to cars both 1j cressidas, awesom cars with alot of potential,

51NGL
Post #207

QUOTE(Spidey @ Dec 6 2007, 12:48 PM) [snapback]1281694808[/snapback]

I have a silver 92 model Grande that I am selling. Very good condition with 181 xxx kms and I am the 3rd owner. The first 2 were a father and son who are family frinds. PM for details. Cheers, Spidey.


cheers mate, bit outta my price range for a project starter. thanks


*keeps an eye on thread*

000.PLS (1jcressida)
Post #208

QUOTE(51NGL @ Dec 7 2007, 10:08 AM) [snapback]1281697442[/snapback]

cheers mate, bit outta my price range for a project starter. thanks
*keeps an eye on thread*



do wanna buy 1 or still considering???

L.drifter
Post #209

QUOTE(skitzcressie @ Dec 4 2007, 02:15 PM) [snapback]1281688567[/snapback]

hey l.drifter how gud is the head on it and how much for it

umm it taps but i think thats because it has no oil it in... anything above 150 i can take some photo's if you want?

skitzcressie
Post #210

ok my dam addictions to cressies is mental i just bought another 1 grrrrrrrrrr any1 got a 1j for sale they rev higher than the 2j so if any1 got 1 call me on 0421038554 or contact troy at autobarn ipswich thanks guys

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

Page 6 of 64
Jump to page
14 User(s) are reading this topic (14 Guests and 0 Anonymous Users)
0 Members:
Loading...
x