#1
21st April 2009 - 05:02 PM
Post |
|
---|---|
The stand alone Adaptronic e420c ECU is now on sale for $990 Including GST Closed loop ignition, idle, fuel, boost and 2x VVT control Can be used with virtually any factory crank/cam angle sensors Datalogging via PC software PC Interface • Datalogging • 3D graphing 8 Confi gurable Outputs Fuel pump, A/C, idle, purge valve, RPM, MAP, Water temp, Tacho, Boost, VVT etc 8 Confi gurable Inputs A/C, TPS switch, clutch, nitrous, 2nd MAP 2 Fuel/Ignition Maps • Combination TPS/MAP tuning • Dual maps for different tunes/fuels Adaptive Fuel Control Tunes itself as you drive! Use on street or dyno! Generic Looms 0.5M loom-$66 2M loom-$99 new looms available , Nissan Skyline R32- GTS-T, GTR R33- GTS-T, GTR R34- GTR Honda Prelude- VTIR 97-01, NISSAN- S13,S14,S15 , Toyota Supra- JZ-A80, 1JZ-GTE, 2JZ-GTTE Map Sensors 3 Bar- $88 1 Bar- $77 Single Channel Ignitors- $50 Autogauge Boost gauges- $40 Dyno tuning and Installation also available PM For any qoutes or queries. GROUP BUYS NOW AVAILABLE TO BOOST AUSTRALIA MEMBERS PM FOR DETAILS website underconstruction [/color] -------------------- Contact us Via PM and we will get back to you as soon as possible
[i][color=#3366FF] |
AdapTronic
Post #10
Cheers guys, Its good to know you guys are supporters of Adaptronic. Its a pity that we dont have so much exposure at the moment, but we will soon though ! |
---|
evaded
Post #18
QUOTE(cmurrayis @ Apr 30 2009, 10:34 AM) [snapback]1283986454[/snapback] The only thing I had to do is seeing its a rb25 Plug adapter for the older ECU I had to switch 2 of the injector wires around on the cars harness other than that When I first got it plugged it in downloaded a map off their website and tuned the key and she started. Need a plug and play option for the Starlet |
---|
AdapTronic
Post #20
Cheers guys and Andy dosent look after the marketing and sales anymore I do, my name is Shan and i look after all of that now hehe ! |
---|
AdapTronic
Post #21
Cheers guys and Andy dosent look after the marketing and sales anymore I do, my name is Shan and i look after all of that now hehe ! |
---|
AdapTronic
Post #23
Hi Shan, Do we need a wideband O2 sensor for the adaptive fuel control or is this included? If so do you sell them or what would your recommend? Cheers Will Hi Will, no you dont need a Wideband O2 sensor fro the fuel capabilities to work. It works as a standrad feature hence why our Ecu's tune very quickly in general. Of course if you have a Wideband O2 it is better, since you have more to work with, but it isnt a must in this case. How much power is the car making? im guessing you have a s15? just a wild guess if this is your car what modifications do you have running and do you have a standard ECU? Cheers Shan Adaptronic |
---|
Will_S15
Post #24
Hi Will, no you dont need a Wideband O2 sensor fro the fuel capabilities to work. It works as a standrad feature hence why our Ecu's tune very quickly in general. Of course if you have a Wideband O2 it is better, since you have more to work with, but it isnt a must in this case. How much power is the car making? im guessing you have a s15? just a wild guess if this is your car what modifications do you have running and do you have a standard ECU? Cheers Shan Adaptronic PM sent |
---|
karismaticfool
Post #29
BumpDy Bump! for a cool ecu might get one when i can afford it. Paying off fines =( |
---|
^^Shaowy^^
Post #30
With the rb25 neo do you have plug and play? |
---|
AdapTronic
Post #31
With the rb25 neo do you have plug and play? Also does it mess with traction control, airbags etc? Still want all standard features without lights on my dash. Tunable to any psi? No we dont have the plug and play loom for the Neo rb25 which is the r34 we have plug and plays for r33 and 32. We can still do an install with a normal loom and yes we can keep all your standard features without lights on you dash coming up. Tunablity to whatever PSI you want is a definate yes so no worries there. Were you considering getting an adaptronic for your Rb25 NEo engine? |
---|
toiletduck1
Post #34
Do you have anything plug and play for an RB20? Not sure whether its best to change to a Z32 AFM or if you have a removal/map sensor option? |
---|
michael_90
Post #35
any chance there is a plug and play loom for a JZA80 Supra.. will be goin in the N/A variant as i will also be doing cams shortly so im searchind aroung for management ...also is this full standalone or piggyback....thanks |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!