Anchor's Ford - XR6 Turbo Ute - 462RWHP  

Page 1 of 3
Jump to page
Anchor
  • Anchor
  • Wrong side officer ..
  • Contributing Member!
  • Member No.: 48,723
  • Joined: 5-July 06
  • Posts: 3,042
  • From: Vegas, CQ
Post #1 post 3rd August 2010 - 09:21 AM
BA MK2 XR6 Turbo Ute. 80,000km. Std bottom end....


Was gunna wait till i finish it etc, but eh looks good enough now.. Current wheels are sold, got defected for the fronts sitting outside the guards. Shit like that happens when you chuck 9.5's on the front of a falcoon. Rollin round on 17" fairlane rims till wednesday.


Engine:
Ford 4L Inline 6

Exhaust:
Custom built by Brad @ Prodyno
Xforce 4" dump and hiflow cat
Mandrel bent 3.5" through to a hiflow 3.5" muffler then out the right side where the XR6 badge was
Running a restrictor plate to keep boost @ 14psi.

Suspension:
Lowered front and rear by pedders.
Heavy duty rear swaybar
Camber kit

Wheels:
Were - 18x9.5 starcorps.
Now - 17x8 Fairlane Ghia
On wednesday - 19x8.5 Koya inox R1's. Swapped em for the 18's.

Modifications:
Xcal 3 flashbox
Performance Valvesprings
Bosch 968 injectors
Bosch 044 inline pump
Rapid V3 intercooler kit
Custom Exhaust
12psi wastegate actuator
NPC 5 puck brass button clutch
Respray thanks to some niggers
HID Globes
Autometer Cobalt Gauges - Boost, Oil Pressure, Volts, Air/Fuel.


Stereo Audio / Visual:
iPhone cord

Estimated Power:
462rwhp on 14psi with afr's of 11.0
Does a good skid.

Anchor's Ford
Anchor's Ford
Anchor's Ford
Anchor's Ford
Anchor's Ford
Anchor's Ford
Anchor's Ford
Anchor's Ford
Anchor's Ford


--------------------
67 SS Nova Coupe. Iron AES 398 LS1. T56. Boost. TCI Pro Touring F&R Clip. Streetfighter Project. 1000rwhp or bust.
90 Chevy Silverado C1500 SWB. 350tbi on gas. Dropped. Daily Driver.

Cuttin up original metal, cause it's fun

Comments

  • Boost Network 70
  • Balin 32
    Post #2

    Looks good, never been a fan of starcorps so IMO it looks alot better with the koya's. Perfect ride height too thumbsup.gif

    brewskibilt motorsports
    Post #3

    one word. tough

    iRice
    Post #4

    awesome

    BoostWagon
    Post #5

    respray thanks to niggers? haha nice


    Love it mate. Also like the exhaust to, different and has been done very neatly smile.gif

    637-PSI
    Post #6

    QUOTE (BoostWagon @ Aug 3 2010, 10:03 AM) *
    respray thanks to niggers? haha nice


    Love it mate. Also like the exhaust to, different and has been done very neatly smile.gif


    x2 thumbsup.gif

    Anchor
    Post #7

    Yeah, every panel got stoned...

    Akshunhiro
    Post #8

    Nice ride. This Ute's pretty good too.

    tom_willie
    Post #9

    I love it... such a nice car.

    Anchor
    Post #10

    QUOTE (Akshunhiro @ Aug 3 2010, 10:27 AM) *
    Nice ride. This Ute's pretty good too.


    I still miss my old one sad.gif

    Stupid 4x4 driving women....

    krayziebenno
    Post #11

    i think i've seen this somewhere in the f/s section. pity the wheels got defects because they look nuts. very tidy ute

    $upa$tar
    Post #12

    ahh immagine the powerskids this would pull xD

    looks the goods mate.. im a fan of the exhaust

    i only got a hk
    Post #13

    what a shitty rice burner...









    <3 tongue.gif

    aglwalker
    Post #14

    hmmmmm i dunno i think i.... FUCKIN LOVE IT!, looks beautiful man good work

    Draven
    Post #15

    Looks pretty good mate thumbsup.gif

    TR3NT
    Post #16

    you know i love it. at least the 18s are going to a good home and the r1's look heaps better in real life.

    wolfman101
    Post #17

    Good power figure.
    1/4 times?

    5000BE
    Post #18

    tuff ute, looks good

    Honda_Power_96
    Post #19

    hey mate,
    isn't it illegal to have the exhaust in front of the rear wheels unless the car is pre 1985??
    or do you only use for track??
    nice ride bud... hope you smoke heaps of shitty holdens laugh.gif

    jacob..
    Post #20

    10 points for a trick ride mate! and im pretty sure the exaust out the side is ok in utes as long as its a certain distance behind the door, i am currently looking into doing the same to my ute.

    Anchor
    Post #21

    QUOTE (wolfman101 @ Aug 3 2010, 11:29 AM) *
    Good power figure.
    1/4 times?

    None yet, no traction anyways. And i don't want to break anything before powercruise. Got a pair of MT ET Streets at home to throw on when i get back. Hope for 12's...

    QUOTE (Honda_Power_96 @ Aug 3 2010, 11:39 AM) *
    hey mate,
    isn't it illegal to have the exhaust in front of the rear wheels unless the car is pre 1985??
    or do you only use for track??
    nice ride bud... hope you smoke heaps of shitty holdens laugh.gif

    Nah, got put over the pits and it was one of the things that was legal haha...

    Anchor
    Post #22

    QUOTE (jacob.. @ Aug 3 2010, 11:52 AM) *
    10 points for a trick ride mate! and im pretty sure the exaust out the side is ok in utes as long as its a certain distance behind the door, i am currently looking into doing the same to my ute.


    Yep, i've only ever seen 1 other falcon ute with it. And it was an XR8 with twin round pipes out the side in WA. 99% sure i'm the first turbo to do it..

    jacob..
    Post #23

    Yep, i've only ever seen 1 other falcon ute with it. And it was an XR8 with twin round pipes out the side in WA. 99% sure i'm the first turbo to do it..

    does it sound louder being alot closer?

    Anchor
    Post #24

    Yeah, think straight through RB but meatier..

    Can't really hear it once it comes on boost though. Spool kinda takes over.

    Anchor
    Post #25

    QUOTE (TR3NT @ Aug 3 2010, 11:29 AM) *
    you know i love it. at least the 18s are going to a good home and the r1's look heaps better in real life.


    Haha, your car made the last photo! Do you feel speshal? tongue.gif

    benji_xrt
    Post #26

    Awesome mate, could not complain with that

    jetcalais
    Post #27

    that ute looks insane mate nice job

    Anchor
    Post #28

    Forgot to add its also got a pod filter bro!!!!

    DK777
    Post #29

    Nice man... Try that power with 13 lol tongue.gif

    astorey
    Post #30

    How much did you spend purely getting that power figure? I've got a newfound love for xr6t's, considering it for my opens but that's another year and a half so might go bf mk2.

    VTR
    Post #31

    Clean ute and nice colour too smile.gif

    wolfman101
    Post #32

    Not having a dig, but why so much power if it can't put it down?
    You said you can't get traction...

    Anchor
    Post #33

    QUOTE (wolfman101 @ Aug 3 2010, 01:11 PM) *
    Not having a dig, but why so much power if it can't put it down?
    You said you can't get traction...


    Thats what the MT's are for.

    Also, i may not have traction off the line but it can definately put it down up high smile.gif

    Z3RO
    Post #34

    In the second pic it looks like someone has stolen your bonnet!! j/k


    Very nice car, I am not a Ford fan but excellent work here. I love the new rims and i would like to see this run IRL.

    Anchor
    Post #35

    I'll be at powercruise. Just gotta fix a few things.

    Gave it a royal flogging on the weekend and found a few issues.

    New throttlebody is on my desk and an oil cooler kit is on its way from rapidsystems.

    2 forced engine shutdowns from a faulty TAC sensor and a limp mode from oil overheat/faulty oil temp sensor..


    Silver bogandore in the last pic makes 496hp (owned by a forum member). Door to door with it..

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Login with Facebook

      Login using your Facebook account!

    Page 1 of 3
    Jump to page
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Loading...
x