Back

 Hyundai Excel Racing Series - Track Attack - Evil things are about to happen to Hyundai Excels  

Page 9 of 53
Jump to page
Post Topic
Evaded Motorsport
Post #281

QUOTE (benno.h @ Feb 28 2010, 08:35 AM) *
There's more in there than you'd think. I reckon close to 10kg.

Finished gutting the interior of ours today, oil is draining right now.

We need some brake pads!


Look back a few pages we have a package deal for brakes.

Mixtapes
Post #282

im after a cheap excel if anybody has 1 too dish off

benno.h
Post #283

QUOTE (Evaded Motorsport @ Feb 28 2010, 03:25 PM) *
Look back a few pages we have a package deal for brakes.


How much for the pads alone?

And what kind of helmets/race suits do you have?

How much are the suspension packages you're offering?

BTW I can't find anything at all in the shop on your website.

Evaded Motorsport
Post #284

QUOTE (benno.h @ Mar 1 2010, 10:48 AM) *
How much for the pads alone?

And what kind of helmets/race suits do you have?

How much are the suspension packages you're offering?

BTW I can't find anything at all in the shop on your website.



still updating the website, too many parts and not enough time :P

Anyway do you have email and I can email you through some prices?

Andrew

Innuendo
Post #285

This looks like an excellent series! I have a bad feeling that despite mentioning that 5 cars hanging around really is enough, that we are going to end up with an excel in the future.

I will try to come out and take some photos of these bad boys in action to :P

trackattack
Post #286

hahaha you know you want one :P

picked up the CV's for mine today
waiting on the water pump to arrive

trackattack
Post #287

anybody got a link for service manual ?

slow bus
Post #288

Just order a CD today send me a pm with your details and Ill burn you a copy

Water pump $60 from Bursons no waiting they have heaps of stock

wasas
Post #289

how easy is the water pump to do? u think 2 noobs could get it done over a few nights?

slow bus
Post #290

@#$! of a job, I spent most of the time trying to undo the crank pully bolt

Ok step by step, I might miss something though

Drain radiator, disconnect battery etc etc
remove all belts PS, ALT, AC
remove PS pump
unbolt top alternator bolt swing away
remove top engine mount
remove pully off water pump
jack up car remove drivers side wheel
remove lower plastic trim
remove lower crank pullies
remove timing belt cover
you have couple of options from here, while it is all pulled apart it is the best time to change the timing belt but this is up to you
option 1- leaving timing belt alone and work around it
option 2 - remove/change timing belt

I did option 1 as this motor will be swapped out in the next couple of months so I dont care if it breaks

remove the water pump 4 bolts the top bolt need the timing belt moved a little but it easily enough done
then but it back the opposite way it was taken apart

undivided
Post #291

does any one know if you are able to put a bonnet scoop on?

wasas
Post #292

QUOTE (undivided @ Mar 2 2010, 10:51 AM) *
does any one know if you are able to put a bonnet scoop on?

I hear the WRX ones look hot.

Evaded Motorsport
Post #293

updated pricing for anyone after parts.

Race Suit Package Includes:
PMD Race Suit Single Layer: $299 (This is a nice bit of gear, exact same price as the RPM Racesuit but with so many more features.) PMD Underwear Set: $159 PMD Balaclava: $35 PMD Race Boots & Gloves: $178 PMD Socks: $35 PMD Bag: $50
Total: $756 + Postage

If Purchased as a package the cost is $699. + Postage

Helmet: We have a PMD Race Helmet the equivalent Bell helmets retail for $600 - $1,000.00

The open face helmet is $299 and the closed face helmet is $449.

If you require a harness we have a 6 point FIA approved harness for $259 can be used as a 4 point as well. We also have several race seats available at competitive prices.

Suspension & Brakes:

Springs are $145 a pair front and rear.
Shocks in KYB are $160 each.
Shocks in Koni Red (Single Cam Excel) are $225 Each Shocks in Koni Yellow (Twin Cam Excel) are $250 for the front each and $195 for the rear each.

Brakes:

Pads QFM A1RM $119
Replacement Rotors are $65 each.

We also have access to an account with Hyundai themselves so if you are after any replacement parts let us know and we can get a price.

We also have video cameras, GPS Data logging and much much more, we also sell Kumho KU36's at very competitive prices :)

NOS440
Post #294

well...i have just scored me a racing excel....don't know if i will be ready for this weekend though...probably aprils round.
Oh and the price was very right :) :P

Innuendo
Post #295

excel here
https://www.boostcruising.com/forums/index....howtopic=529592

slow bus
Post #296

QUOTE (Innuendo @ Mar 2 2010, 01:29 PM) *
excel here
https://www.boostcruising.com/forums/index....howtopic=529592


You can pick them up way cheaper than that, $500 should be the target, looking at another tomorrow might run 2 cars

undivided
Post #297

so does any one know if your aloud to fit a bonnet scoop/vents and have a hole in the bonnet for it?

Evaded Motorsport
Post #298

I would say probably not judging by the rules.

undivided
Post #299

cool thanx

$upa$tar
Post #300

havent found a excel yet :P
but ill come for a look. ill bring the SLR camera down to and get some shots :)

Big_Red_
Post #301

QUOTE (undivided @ Mar 2 2010, 03:32 PM) *
so does any one know if your aloud to fit a bonnet scoop/vents and have a hole in the bonnet for it?

Yer i wanted to cut one too because my pod is a bit too big and it hits the bonnet when it's closed.

trackattack
Post #302

I did the CV's on my car last night, turned out to be pretty straightforward which was good.
This is my first front wheel drive car, so far they seem pretty straight forward to work on.

Not sure if I will have it ready for this weekend or not, water pump needs doing as well.

We have 6 Excels entered for this Sunday
entry list is here - clicky clicky

trackattack
Post #303

AMS is making the race numbers for the Excel series which we are giving to the Excel's for FREE.

The Numbers are Being Sponsored by Real Dyno Performance, so if your in Kippa Ring and need help give them a try, they have just built two excel race cars to run in the series, ask for Lee 3284 1925

Other workshops who can help are
Northside - Quattromotive - Ferris Ph 3266 2228
Southside - Absolute Automotive - Michael ph 3209 4711

The 3 guys above will help you with your cars or parts if you need them.

If your after a car try Nick or Ana from ANA Autos - 0404304876 or 0431517477


SIGNAGE OFFER From AMS

option 1.printed sticker 1250 x up to 400 high depending on scale of business name .
option 2. two stickers of half length and up to same hight.
option 3.printed banner material same as option one.
nb.all the designs must be in eps format so we dont have to charge you to copy art work.
cost for above is a resonable $55.00 inc.gst.
so phone Richard or Monique on ph: 3808 3988 if you need some extra signage

AMS also has a well setup paint shop, they paint cars and specialise in Bikes.

Beannie
Post #304

Hi, i've been watching this over the past few weeks and is developing quite nicely.

anyway... am hopefully picking up excel this weekend jeff, so you should have another one for your entry list soon!

NISMOgemini
Post #305

SHIT!!! i think im more excited about getting home from my Europe trip to buy an excel then i am about actually going to europe!
which is in 4 months time. will be out to watch a few before hand tho :)

NISMOgemini
Post #306

just looking on car sales.. they seem to be averaging $1500 with high 100ooo low 200ooo on the clock... that sound right?? seems pricey for a coke can

trackattack
Post #307

I would have said between $300 to $1000
condition ranging from needing mechanical work and shitty paint through to a road worthy condition one.
I have seen quite a few sell on ebay between $500 to $800
the dear ones dont sell and get relisted cheaper

there is an early one on ebay for $100 at the moment which looks quite tidy, and another one for $50 with a fucked clutch.

you could also try Park Ridge Wrecking at Loganlea, they are advertising excel parts and wreckers often buy whole cars that may suit what we are doing.

NISMOgemini
Post #308

is there any common problems or things that should be addressed on these things before taking them out?

trackattack
Post #309

QUOTE (NISMOgemini @ Mar 3 2010, 09:38 AM) *
is there any common problems or things that should be addressed on these things before taking them out?

The cv's are probably the most common issue, you will hear them clacking when taking a tight corner at low speed.
the water pumps are often stuffed on the high k ones as well.

other than that they seem to be a pretty tough engine
mine has 292'000 k's on it and made 65hp :) on the dyno at RDP

trackattack
Post #310

Make that 7 Excels running this sunday :)

wasas
Post #311

We'll be running as well as. so there's another one to add... havn't yet registered.

Has anyone managed to get a set of 205's on 15's fitted yet? I'm trying to find some rims and want to make sure they will fit.

trackattack
Post #312

Hey Wasas,

If your coming this sunday confirm as soon as you can.
It keeps the time keepers happy if we get the entries in as early as possible (and saves on late fee's)
plus I am getting the numbers made up as each car enters, so need to give AMS notice to get the sticker printing done.

I trial fitted the wheels off my datsun as they have the same PCD, but as suspected the RWD offset doesnt suit.
also the nuts that hold the hub/rotor on the excel foul on the back of the datsun wheels which are not recessed.

has anybody tried a set of stock wheels off a 180sx ?

benno.h
Post #313

Paid up.

Just need a helmet....

See you sunday!

Just cotton longsleeve clothes should be ok? Shoes?

Big_Red_
Post #314

QUOTE (wasas @ Mar 3 2010, 12:43 PM) *
Has anyone managed to get a set of 205's on 15's fitted yet? I'm trying to find some rims and want to make sure they will fit.

I measured it up and I seriously doubt they will fit. Bloke down at the wheel shop agrees....but i'm happy for someone to prove me wrong :)

trackattack
Post #315

QUOTE (benno.h @ Mar 3 2010, 01:33 PM) *
Paid up. Just need a helmet.... See you sunday!
Just cotton longsleeve clothes should be ok? Shoes?


yep long non flammable clothes
i wear race boots, try to find something that isnt nylon - eg canvas.

PM on way re entry.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Forgotten your password?
  • Login with Facebook

    Login using your Facebook account!

Page 9 of 53
Jump to page
65 User(s) are reading this topic (65 Guests and 0 Anonymous Users)
0 Members:
Loading...
x