1.5jz cressida
Post #841
well got abit done on the weekend, engine and box is out of my commodore and just finished unbolting my auto off the 2j as i wright lol. npc clutch and billet flywheel has been ordered and should have it this week some time. then the 7m comes out this weekend. must say i wish i got a cressy along time ago as it drives so good for an older model car i just want to keep driving it. cant wait for the jz power back again. sounds like its gonna be a fun little rig, you gonna sleeper spec or just a nice looking turbo cressida??????? how much power was the commo 2j making???? |
---|
pig060
Post #842
yeah sleepa/ just clean looking with no cooler showing etc. not sure as i only dynoed it once and it was leaning out due to no real fuel upgrade back then. it made 2##rwhp at about 3000rpm ( only made 3psi) lol and started to lean out so we backed off (got a walbo intank fitted but i reackon they didnt fit it as it should have made a difference but didnt seem to do anything more then a stock fuel pump so im guessing the guy screwed me over) but i would like to get somewere between 400-500rwhp with the manual. |
---|
1.5jz cressida
Post #846
2800 stall is tiny though. I know of a 4000 stall forsale but yeah. How much you want for yours ? you dont need 4000 stall thats just silly 1JZ747 had 3400 i got 3500 and you struggle to get there |
---|
1.5jz cressida
Post #848
yeah i know 4000 is over kill but id rather be over then under. I would have thought a 2800 would do much. my mate had a 3200 but any more then 3000stall he would spin his wheels but still managed a 11.6 |
---|
pig060
Post #849
2800 does help abit but i wish i got a 3-3500 for my setup, 4000 i reakon is overkill and you will lose mph at the strip from such a high stall speed but u get out of the hole quicker if you dont spin hahaha. 2800 is very good for an everyday drive car. standed stall speed is 2200 im pretty sure. |
---|
Rusty Night
Post #854
Guys, |
---|
1.5jz cressida
Post #855
Guys, I am parting out my genuine jzx81 mark II might have some shit you are keen on https://www.boostcruising.com/forums/index....howtopic=469480 cheers Kyal hey kyal when i get the cressida im coming to see you |
---|
chris davey
Post #856
yep, it is bigger and the MV converters don't respond the same ie. 2800 1j converter will generally got to 3500 or so depending on turbo setup but 2800 2j one will be lower than that. |
---|
Rusty Night
Post #857
hey kyal when i get the cressida im coming to see you what are you after? shits going out like pancakes |
---|
1.5jz cressida
Post #858
what are you after? shits going out like pancakes no idea i might want your cage but hey il just wait til i got my baby back |
---|
1.5jz cressida
Post #861
i know there is a list for the quickest 1jz powered cressida but does anyone now if there is a top 10/20 2jz cressida list? if not we should start to make one as there is a few 2jz cressida's starting to get around now days. id like to know all not just 2jz but 1jz as well my old car ran 11.6 at 118mph and was told that was the fastest cressida in qld, myb MRDOHC can grab a new list me il pm him but yeh there are a few but not many that are actually looking for quick times, im building my cressida for low 10's looking at what i've already run on the tune i had its not gonna be hard, but il sus the list out |
---|
1.5jz cressida
Post #862
1.5jz cressida cars looking good need new front bar tho n new piece of wood maybe wood turn it lol pig caint wait to c it all the others sound good 2 i know i need a front bar just prefer to spend money on engine then looks, but im getting the front bar fixed and the gaurds fixed and lowered abit more then im happy |
---|
pig060
Post #863
well ive got some new rubber engine mounts as i broke the others taking the 7m out (dont ask hahaha) and a few small bits from toyota that i was missing for my clutch to bolt up. so now hoping to have all that bolted up to the engine and bash the tunnel around abit and then bolt the engine and box in by sunday so ill see how i go |
---|
chris davey
Post #864
Mr DOHC's list on toymods is all cressidas not just 1j ones BTW I run the quickest 1jz powered vehicle list if you didn't know so anything quicker than 12.5 should be in the top 30 for my list |
---|
1.5jz cressida
Post #866
Mr DOHC's list on toymods is all cressidas not just 1j ones BTW I run the quickest 1jz powered vehicle list if you didn't know so anything quicker than 12.5 should be in the top 30 for my list well my 1st cressida 11.6 at 118mph was the quickest i have run new cressida is 11.9 at 96mph can you copy and paste the list????? |
---|
1.5jz cressida
Post #867
mates 1.5jz silvia runs best time of 10.745 at 128.8mph with old tune now new tune is 450hp on 22psi so yeh i wanna see this list |
---|
wheelzie1989
Post #869
just take your time with it and make sure you have all the necessary tools. |
---|
pig060
Post #870
when i put my 2j in my commodore the guy that did the conversion said it was a pain in the ass and that was it out of the halfcut so i guess it will be harder in the car. i think it will take you a few hours with a mate from what ive heard from others but im not sure as ive never takin off the twins my self. |
---|
unclepaulie
Post #874
Hi cressida guys, |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!