LoginQfm High Performance Brake Pads - Sick of paying too much for high performance street and track pads?
 |
gslrallysport
Post #71
QFM A1RM - Why pay more!!! QUOTE Installed a set of A1RM's front and rear just before Z Fest. By far the best value brake pads I've ever used, no pedal fade from high speed and hardly any dust which is what I expected from a high performance pad. I liken the performance of these to an EBC Red Stuff but at a fraction of the price! http://www.aus300zx.com/forum/showpost.php...p;postcount=157 |
|---|
28th April 2010 - 03:41 PM|
|
gslrallysport
Post #72
QFM A1RM again outperforming expectations on the track! QUOTE GSL, The pads arrived and were fitted up just in time for a recent club track day at Wakefield Park. To be honest, I was absolutely amazed at their performance. They work well from cold and have so far not made any noise. When warmed up (one or two corners at the most), their bite was unbelievable (on my MX5). It felt like I had the car standing on its nose braking into Turns 2 and 10 at Wakefield! Their performance allowed me to brake much later than I have previously and I actually had to mentally refrain from hitting the brakes early. And the best thing, they make minimal dust! Regards, Tony No link available, sent via email. |
|---|
|
|
gslrallysport
Post #73
QFM A1RM Fitted to JZA80 Supra! QUOTE Got the A1RM fitted on the car with the brake fluid you guys sell. Even though I'm still bedding in the brake pads, I have to say you can feel the difference in the braking power these have. I had Bendix Ultimates prior to the A1RMs and they are a world of difference! http://www.supraforums.com.au/forum/showpo...mp;postcount=27 |
|---|
|
|
gslrallysport
Post #77
QUOTE (bgalway @ Jun 11 2010, 06:02 PM)  hey mate, can i please get a price for 06 wrx HPX pads please. front and rear. Thanks Brendan Hi Brendan, Front and rear QFM HPX pads to suit would be $158 delivered, and in stock. Regards, Greg |
|---|
|
|
gslrallysport
Post #78
QFM A1RM fitted to JZA80 Supra! QUOTE UPDATE: Took these out at Sandown... no brake fade what so ever! the pads / fluid held out really well, and was still pulling up the car after a whole day of hard braking both in the wet and dry! Totally impressed by these pads and I highly recommend them! http://www.supraforums.com.au/forum/showpo...mp;postcount=27 |
|---|
|
|
gslrallysport
Post #79
QFM Pads Fitted to BA Falcon! QUOTE Hi, I own and drive a BA Futura 4.0L auto sedan. I was so impressed with the performance of your QFM pads on my BA Falcon I though I would drop you a email. Ok firstly I spoke to someone there questioning on what pads and what improvement I could expect and was told QFM pads and around 10% or so, ok that was sure a understatement. I had the QFM pads and new DBA slotted rotors fitted and I got to say I was very surprised the 10% improvement was wrong try 40 to 50%. I have found that now braking is effortless less peddle pressure is required and the actually braking action is a major improvement, when I say peddle pressure I mean before on the standard BA pad and rotors you had to apply a reasonable heavy pressure to apply the brakes where now its almost just a toe pressure to apply the same braking effort. Stopping from 100K’s the difference is easily 3 to 4 car lengths and as before less peddle pressure. One of the keys here as well as the stopping improvement is the requirement to use less peddle pressure this is something that the older drivers would appreciate not to mention make for safer driving. I feel fitting the QFM pads and DBA rotors has made my vehicle much safer to drive and given me more security in the braking department. K.Chapman North QLD No link available, sent via email! |
|---|
|
|
gslrallysport
Post #80
QFM HPX Fitted to S13! QUOTE If there were any doubters, I have the HPX pads on my S13 (with an R33 GTS-T hub/brake conversion) and oh my God it pulls up very fast on RDA slotteds. they can take a fair bit of abuse but if you were ever going to track the car you'd go for A1RMs. For the money, hard to fault! http://www.fordlaser.com/viewtopic.php?t=50469&start=126 |
|---|
|
|
gslrallysport
Post #81
QFM A1RM Fitted to 246rwkw R33 GTST on track! QUOTE I have used the A1RM's on my 33 for a club grip day and absolutely love it......ran Penrite sin 600 brake fluid, with HEL braided brake lines, RDA slotted rotors and A1RM's and did a solid 6 sessions and the brakes were fine all day.....was so much fun.....now time to get another set for another grip day  http://www.skylinesaustralia.com/forums/in...t&p=5400944 |
|---|
|
|
gslrallysport
Post #83
QFM HPX Fitted To S13 Silvia! QUOTE Just thought I'd let you know. I have fitted my HPX pads 3 weeks or so ago and are really good, absolutely no dust on my white rims. Very impressed with product! Thanks again  Tim No link available, sent via PM on NissanSilvia.com |
|---|
|
|
gslrallysport
Post #84
QFM HPX Pads Fitted To VW Golf! QUOTE I have had the HPX pads front and rear of my 97 Golf 2.0 for a month or two now and I'm a big fan. The price was one of the best I could find, who ever I spoke to at GSL was really nice and the pads themselves stop great. Way better then the supercheap ones I had before which cost more. And my wheels are staying clean much longer then they used to. Very happy customer. They also got to Sydney the day after order for next to nothing cost. http://www.vwwatercooled.org.au/f24/qfm-hi...html#post554180 |
|---|
 |
boostd_civic
Post #85
Can't recommend these guys enough! Thanks very much greg, ordered brake pads at 11:30 am and got them at 3pm |
|---|
same day.|
|
gslrallysport
Post #86
Thanks mate! |
|---|
|
|
gslrallysport
Post #88
Hi there, |
|---|
|
|
gslrallysport
Post #90
QFM HPX Fitted to VY Commodore! QUOTE Just fitted the HPX's to the VY.. can really feel the difference! Can finally have some piece of mind when i put my foot on the brake! http://forums.justcommodores.com.au/gsl-ra...tml#post1676508 |
|---|
 |
JAK355
Post #91
Just giving these guys a good wrap, awesome service and support. |
|---|
|
|
|---|
 |
jezza30
Post #94
hey mate, |
|---|
|
|
gslrallysport
Post #95
QUOTE (jezza30 @ Jan 8 2011, 01:46 PM) hey mate, i came around yesterday to get a set of pads for my integra, was going to get my rotors machined and turns out they will be better off replacing. Think for my 2000-01 dc2 type r front rda slotted rotors were $175 if im correct and i will probably just need stock rear replacements if i could get a price for those that would be great. cheers Hi mate, I figured it was probably you! Standard rear rotors are $55 each. Regards, Greg |
|---|
|
|
|---|
|
|
gslrallysport
Post #99
QUOTE (jezza30 @ Jan 11 2011, 07:40 PM) to easy ill make an order for the front rda slotted rotors for my dc2 type r first thanks. and ill worry about the rears another time. cheers No dramas, with these it's probably just easiest if RDA send them direct to you. Just PM me your full name, delivery address (preferably a work or business address!!) and email and I can fire you through an invoice with direct deposit details, or else credit card over the phone is also available. Should have your phone number on file, so won't need that. Any questions let me know! Regards, Greg |
|---|
|
|
gslrallysport
Post #100
QFM HPX wins again against the competition! QUOTE QFM HPX vs. Bendix Ultimate ...Ultimates are like a set of Ferodo generic pads! In My Opinion - I have tried both on my VX Commodore: I had Bendix Ultimates and I found them to be noisy, very very dusty and it liked to eat out my rotors, they pull-up was okayish but I found they didn't have enough "bite" for my liking. The QFM HPX Pads - I had them fitted to new rotors as the old ones were chewed out and could not be machined further. I purchased standard rotors after the pads had been bedded in wow.. simply wow! The pull up from them was so much better, and ABS kicked in much much quicker hardly any dust and alot less noisy. Still some squeaks here and there but all in all, a much better improvement over the Ultimates. http://www.fordlaser.com/viewtopic.php?t=80771 |
|---|
|
|
gslrallysport
Post #101
QFM HPX used in 2005 Subaru Forester XT QUOTE Got my HPX's and RDA slotted rotors put in today I didn't quite realize how bad it was before!http://ozfoz.com/forum/viewtopic.php?f=89&...=a&start=36 |
|---|
|
|
gslrallysport
Post #102
QFM HPX Fitted to XT Forester! QUOTE Agreed! I've just had the above combo installed yesterday [HPX pads and RDA Slotted Rotors] and the difference is unreal! Big thanks to Greg [from GSL RallySport] for the easy communication,good prices and quick postage! http://ozfoz.com/forum/viewtopic.php?f=89&...=a&start=36 |
|---|
|
|
gslrallysport
Post #103
The Brutal Truth About A1RM! QUOTE I use A1RM on the track/street on a heavy arse underbraked car. fucking brilliant, not sure how anyone drives a car without them, come into their own in the triple digit speed range. brake dust is a royal mofo, but that's life i guess. a stock euro car with tuv standard pads dust just as bad and they are oem and don't stop as good. i hear good things about ds2500 but at double or triple the price, forget that, the a1rm will last 3 track days for me. not even harsh on rotors like some people toss on about, the pads are rather soft imho. http://performanceforums.com/forums/showpo...amp;postcount=6 |
|---|
|
|
gslrallysport
Post #105
$119 for the set assuming non-Brembo. or $149 for Brembo. |
|---|
-
Member Login
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create Account -
Login using your Facebook account!